Cutting Machine Installation Method(for Cutting Stones)

- Aug 30, 2017 -

Tips for the  installation method ofcutting machine(for cutting stones):

1, first placed parallel to the two tracks on the ground. The width is wider than the cutting machine walking wheel.

2, in a parallel orbit on the rack, and before and after the move and the track completely fit and can move freely.

3, put in the rack stone cutting machine host, the four wheels on the host to fully match with the tank on the rack, and the host after the movement direction and the direction of movement of the rack into 90 degrees and their respective Freedom of movement.

4, install the power, so that the motor through the motor tripod and the host firmly connected, and the motor axis direction and the direction of the host vertical horizontal cross.

5, install the belt.

6, install the shield.

7, start the motor, check the direction of rotation of the blade axis and the arrow pointing the same direction.

8, the installation of saw blades. Turn on the water pipe.


Stone cutting machine with a high processing efficiency, low production costs, easy to use and so on are widely used. In order to be able to properly play these functions, you need to ensure the correct installation method, so master the stone cutting machine installation method is the premise of normal work.

Previous: The Application of Dry Cutting Beads for Cutting Marble Next: Suggestions on the Rational Use of Diamond Wire Saws(From Diamond Tools Company)

Related Industry Knowledge

Related Products