How to Use the Wire Joint Correctly

- Sep 14, 2017 -

Wire joint widely used for diamond wire saw. But how to use the wire joint correctly?Before the rope is used and wire saw is broken during use of the wire saw, we should use wire joint to joint the wire so that the wire saw is connected to a closed loop. The method and procedure are as follows:

Firstly,two bare wire saw length equivalent to joint length;Secondly,the two exposed wire rope into the steel joints, joints and adjacent springs should be no gap;Thirdly,The use of diamond beads rope saw special buckle clamp, the buckle will be fastened. In the middle of the joint, the middle part of the joint is placed in the buckle with the buckle, and the pressure is pressed once every 90 °. Then, the ends of the joint are placed in the buckle clamp. Then, the middle part of the joint is placed in the buckle.Lastly,Check the joints after press the joint, remove clean the joint with the emery cloth and other burrs.


Previous: quarry tools for mining Next: The Forming Method of Diamond Wire Saw Beads

Related Industry Knowledge

Related Products